USA and Canada (English)
Europe, Middle East & Africa
The DM1309 at 2.82m wide provides a very sturdy and economical solution to the small and medium size farm without compromising quality and finish.
Ideally suited to farmers with low horsepower tractors or a limited amount of mowing to carry out.
The DM1309 boasts a host of features you would expect to find larger, more expensive machines, including:
|Model||Working Width: ft (m)||Minimum Power (hp)||PTO Speed (rpm)||Discs|
While most front mounted and rear mounted mowers feature a stamped steel spur gear cutterbar, which can twist or fail at high mowing speeds, the DM Series features an individual gearbox design to handle extreme working conditions. Each individual disc module is powered by a shaft running behind the cutterbar. This creates a lower cutterbar profile while reducing backlash as each module doesn’t have to power the one next to it. The main drive shaft also features a weakened shear point to protect the cutterbar if you happen to hit a rock or foreign object in the field. Each module is filled with lifetime oil for low maintenance.
The coil tines gently condition the crop as it passes through the conditioner, leaving the crop loose and well aerated to discharge moisture quickly for fast drying time. For more aggressive conditioning in grass crops, the adjustable comb may be moved in between the tines to strip the waxy coating off of the plant stems.
Since the mower is suspended at the outermost parts by an overhead frame it can be pulled through the field rather than pushed. This provides a higher degree of suspension travel while allowing the mower to retract backwards and clear small mounds or ruts in the field without gouging the ground.