Unlike competitors, our 1800 Series is designed to follow directly behind the tractor. The result is dense, high quality hay - with no flimsy banana-shaped bales that immediately fall apart when they're picked up.
Our pre-compression chamber starts building density before baling to reduce plunger load, lower HP requirements and increase baling capacity
Our OptiForm™ bale chamber has been extended by 18 in. to ensure consistent bale shape and density in all conditions
Enhanced pick-up cross augers provide additional pick-up capacity, particularly in large windrows and uneven crops
A new packer fork with revised spacing significantly increases feeder capacity in a wide range of crops and conditions
Maybe you need a strong, reliable baler for a limited number of acres. Or you're a high-volume producer and custom operator who mechanically loads and transports a lot of hay. The 1800 Series has models to fill both needs.
A gauge lets you preset bale density to keep bale density and weight constant even as hay moisture conditions change through the day
Short plunger strokes in the 1800 Series reduces wear on the baler, prolonging component life and increasing reliability
Because field and road positions are one and the same, you save time when you’re on the move
|Model||Bale Size - H x W: in (mm)||Baler Weight: lb (kg)||Plunger||No. Knotters|
|MF 1836||14 x 18 (356 x 457)||2,700 (1,224)||92 strokes/min.||2|
|MF 1838||14 x 18 (356 x 457)||3,050 (1,384)||100 strokes/min.||2|
|MF 1840||14 x 18 (356 x 457)||3,500 (1,497)||100 strokes/min.||2|
|MF 1841||16 x 18 (406 x 457)||4,375 (1,985)||100 strokes/min.||2|
|MF 1844N||16 X 22 (406 x 560)||7120 (3,236)||90 strokes/min.||3 Heavy Duty Twine Tie|
|MF 1844S||15 X 22 (380 x 560)||7120 (3,236)||90 strokes/min.||3 Heavy Duty Twine Tie|