USA and Canada (English)
Europe, Middle East & Africa
Pastures, industrial sites and waterways have met their match.
Available in 3-point mounted or pull-type configurations, these cutters make quick work of any job around the farm or ranch. A series of economy rotary cutters, the EM60 and EM72, are also available for the value-minded customer with light-duty needs.
EM Series - Light Duty 3-Point Mounted Rotary Cutters (EM60, EM72)
RC Series - Medium Duty 3-Point Mounted Rotary Cutters (RC48, RC60, RC72)
RC Series - Multi-Spindle Rotary Cutters (RC96, RC120)
RX Series - Flex Wing Rotary Cutters (RX120, RX180)
|Model||Cutting Width in (mm)||Overall Width in (mm)||Min. Cutting Height in (mm)|
|EM60||60 (1,524)||66 (1,676)||1.5 (38)|
|EM72||72 (1,829)||78 (1,981)||1.5 (38)|
|RC48||48 (1,219)||53.5 (1,359)||1.25 (32)|
|RC60||60 (1,524)||66 (1,676)||1.625 (41)|
|RC72||72 (1,829)||78 (1,981)||1.0 (25)|
|RC96||94 (2,387)||99 (2,523)||1.25 (32)|
|RC120||120 (3,048)||127 (3,226)||2.0 (51)|
|RX120||126 (3,200)||88 (2,235) Transport
132 (3,353) Operating
|RX180||180 (4,572)||96 (2,438) Transport
188.5 (4,788) Operating
Massey Ferguson has extended its range into a new power sector-up to 275 PTO horsepower and 350 maximum ISO engine horsepower. Designed not only to meet upcoming emission standards, but to do it more economically than ever before. Our new 8.4L AGCO SISU POWER® engine works hard to satisfy you and Mother Nature.
The panoramic cab of our new Massey Ferguson® 8600 Series is a full 28% roomier than before, with exclusive OptiRide cab suspension, a standard air-suspended swivel seat and our new seat-mounted control console. Every detail in your working environment is designed to give you more comfort, convenience and control in one of the quietest cab in the industry at 71dBA.
A highlight of the MF8600 Series is the redesigned, seat-mounted control arm that puts all key functions – including electronic control of up to six hydraulic remote valves – literally right where your fingertips want them to be. The control arm also includes an advanced ISOBUS-based Control Center Display, which now includes video capability, as well as integrated control of any ISOBUS-compliant equipment.
All major tractor and implement controls are sensibly located on the overhead roof liner, by the right B pillar/right console or on the seat-mounted control arm that moves with the operator. That includes the new Control Center Display that provides a user-friendly interface with a wide variety of tractor and implement functions – which means you don’t need to aim for a moving target when changing settings on the go.
This cooperative combination works like a dream, providing clutchless operation as well as the ability (when DTM is activated) to control both the engine speed and transmission ratio automatically. The engine runs at lower speeds, thereby reducing fuel consumption, and automatically analyzes and reacts to the load and power needed for each specific job.
Our new Massey Ferguson® 8600 Series tractors are the first in the world to feature e3 Selective Catalytic Reduction (SCR) clean air technology – and deliver compliance without compromise. This thoroughly proven process converts the Nitrogen Oxide (NOx) gasses that normally exit the exhaust into nitrogen and water, making it the cleanest tractor in the industry.
Click here for more information about e3 Clean Air Technology.
Our innovative front axle support casting allows the use of a fully integrated 3-point hitch that’s stronger and more compact, improving lift capacity and ground clearance. The new design also provides the option of a 1,000-rpm PTO.