USA and Canada (English)
Europe, Middle East & Africa
Whether you're a part-time farmer, rancher, livestock owner, sundowner, dairy farmer, landscaper, construction contractor or municipality, our utility tractors from 32 to 85 PTO horsepower provide ultimate performance and reliability.
|Model*||Engine hp||PTO hp|
|* Low Profile and Cab Versions available for all models.
** High clearance version available for 2660, 2670 and 2680.
Please check with your local participating Massey Ferguson dealer for availability of all models.
|MF 2650 HD||74||62|
|MF 2660 HD**||81||70|
|MF 2670 HD**||91||77|
|MF 2680 HD**||97||83|
An engine you can count on – start to finish.
For more than 75 years, Perkins® engines have been recognized worldwide for their fuel efficiency, quick starting, excellent torque backup and raw lugging power. For over 50 of those years, they’ve also been a lynchpin of legendary Massey Ferguson reliability.
The HD Series is powered by a Tier III Perkins 1104D-44 T 4-cylinder turbocharged diesel engine, featuring advanced design technology to deliver robust performance. The more load, the harder it works, with less shifting of gears.
An optional 12 x 4 Partially Synchronized transmission is ideal for applications that require more speeds, such as cutting and baling hay. New side-mounted controls are easy to reach but out of your way.
Massey Ferguson HD Series tractors offer two powerful transmissions:
8F x 8R SynchroShuttle Transmission
Standard SynchroShuttle 8x8 offers on-the-roll shifting that allows you to get more done in your workday. Gears 1 through 4 are synchronized, as well as forward and reverse. Standard on all HD Series models.
12F x 4R Synchronized Transmission
Offering ideal speed selections for hay making and a straight, in-line shift pattern from 1st to reverse, this 12F x 4R transmission is synchronized between 2nd and 3rd gear and between slow and fast ranges. Optional on all models.
Side-mounted Transmission Controls
Off to the side and easy to reach, transmission controls are out of your way. A perfect blend of freedom and efficiency.
With the majority of the HD series tractors performing heavy duty utility applications like heavy loader work, batwing mowing, baling and other applications where hydraulic capacity is a necessity, these utility tractors have some of the highest hydraulic flow ratings in the industry.
Strong 3-point linkage on every HD Series tractors boast up to 3,682 pounds of lift capacity, for optimum implement accuracy and responsive control, even with the largest implements.
Over 60 years ago, Massey Ferguson (Harry Ferguson) invented the legendary 3-point hitch - which changed tractor design forever and has been copied on nearly every modern day tractor.
The legendary Ferguson 3-point hitch system on the HD Series provides up to 3,682 pounds of lift capacity.
With lift capacity at the hitch point of 3,682 lbs (2670 HD/2680 HD) and 3,291 pounds (2650 HD/2660 HD), you can take on any heavy duty job.
Top Link draft sensing is standard and is ideal for controlling the depth of ground engaging implements like a plow or cultivator. As the tractor starts to pull hard through tough soil, the draft sensing automatically adjusts the depth of the implement to maintain ground speed.
Other features like cross drilled ball ends make hooking up to different category implements an easy task. Optional extendable lower links make hooking up to implements a fast chore.
Improved 3-point quadrant
All HD Series models showcase a new control console, featuring, among other things, enhanced control of your 3-point hitch. The clean, efficient design of the 3-point quadrant on the console works to minimize vibration noise, while allowing accuracy with ground-engaging tools by means of handy positioning and draft levers.
3 Point Hitch Pump
3 Point linkage
Extendable Lower Links
Standard on all HD Series models is an Independent PTO system. The PTO is engaged by the simple pull of a lever to make starting and stopping the PTO very easy to do on the go. What’s more, 540 or 1000 RPM at the PTO is achieved at a relatively low engine RPM which will save fuel plus wear and tear on the tractor.
Over time, you do a lot of living on your tractor. So we believe an HD Series utility tractor should be a place where you’ll feel right at home.
With powerful hydraulics and the highest weight-to-horsepower ratio in its class, you can count on these low-profile specialty versions of the HD Series utility tractors to work hard in small spaces.
|MF 2650 LP||
|MF 2660 LP||
|MF 2670 LP||
|MF 2680 LP||
The exhaust system runs horizontally below the operator’s platform, exiting near the rear axle to avoid obstructing the line of sight and further enhancing visibility.
The folding joint on the ROPS can be used to reduce overall height. Fender-mounted deflector rails protect the rear lights.
A steel guard on all HD Series models protects the fuel tank against damage.
Because the HD Series is the heaviest in its class, it’s also the most solid, the most stable, and the one utility tractor that resists wear-out longer than all the rest.
But when regular maintenance is required, you’ll find we’ve made that easier than ever too, with features like these:
Routine maintenance has never been easier. The newly designed hood flips up and out of the way to make checking the engine oil, cleaning the air cleaner, or any other regular maintenance items a breeze. Two gas struts hold the hood up and out of the way so servicing the tractor is a quick and easy task.
To keep your tractor running right, there’s an easyaccess, two-stage air cleaner with pre-cleaner and dust discharge.
To save you steps, the engine oil dipstick, filter and fill are all conveniently located on the same side of the engine.
Our EZLift, tilt-up hood means no heavy lifting or clumsy metal panels to remove.
Massey Ferguson loaders are custom-designed to specifically match our tractors so they work as an integral unit.
With additional features dependent on model.
See our separate Compact, Utility and Mid-Range Loaders brochure for details.
Whether it’s the extendable lower links to make hooking up to 3-point implements easier or front weights to ballast the tractor, accessories and front mounted implements will allow you to fit the tractor to your specific needs.
With a cutting width of 72 inches (182.9 cm) these mowers are well-suited for pastures, overgrown fields and other demanding jobs.
Great for leveling a work site, grading a gravel driveway or manhandling dirt, sand or snow, these medium-duty blades are available from 84 to 96 inches wide (213.4 to 248 cm).
Move mountains of dirt, gravel, sand or snow with these durable box blades in working widths from 72 to 84 inches (182.9 to 213.4 cm).
Other options and accessories include:
For complete information and specifications, see our separate 3-Point and Pull-Type Implements brochure.